t8 fluorescent tube-Shenzhen Hopesea Lighting Electronics CO.,LTD _

Home > Products > Lighting Fixture > Architectural Lighting >Grille Light Panel

t8 fluorescent tube

MOQ ：100000 piece

Lead Time ：30 Days

Inquiry Start Order

Seller Support : Trade Authenticity Guaranteed & Accepting

Payment : T/T,Western Union

Departure Port : Shenzhen

Product details

Supply Ability

Supply Ability：1000 piecesWarranty(Year)：1 Year

Product Specifications

Brand name：Hopesea

Product Description

t8 fluorescent tube
●Product parameters:

Item	Technical parameters
Model	HP-T8-3T28812-B			LX-T8-12-18W
Size(mm)	*Φ26600MM**			*Φ261200MM**
Input Voltage	AC100-240V			AC100-240V
Total Power	9W			18W
LED Quantity	144PCS			288PCS
Luminous Flux	675-800lm			1350-1520lm
Illumination	1M:155LUX	2M:50LUX	3M:25LUX	1M:330LUX	2M:110LUX	3M:65LUX
CRI	80±5%RA			80±5%RA
Beam Angle	180°			180°
Working temperature	-30℃~50℃			-30℃~50℃
Life Span	≧50,000hrs			≧50,000hrs
Shell Material	Aluminum + PC (Transparent/ Mist)			Aluminum + PC (Transparent/ Mist))
Ambient Humidity	10%~90%			10%~90%
IP rating	IP50			IP50
Shell Color	Silver			Silver
Product Warranty	2 Years			2 Years
Color Temperature	300-3500k /6000-6500K/7000K			300-3500k /6000-6500K/7000K
Color	Warm White、Pure White、Cool White			Warm White、Pure White、 Cool White
Applicable interface	T8
Safety Certificate	CE\ROHS

●Notice for installation:：

Before installation, cut off power to prevent electric shock, and avoid touching the surface of light while working.

The light should be avoid installed in place of heat, hot steam and corrosive gas, so as not to affect their working life.

Before installation, make sure that installation position can withstand 10 times the weight of the product.

For indoor use only, please pay attention to the waterproofing when using outside.

Please install on flat places with no vibration, no rocking and no fire hazard, pay attention to avoid dropping down, colliding and knocking.

●Replace traditional fluorescent wiring diagram

l Please pay attention that when use Tube LED T8 to replace traditional fluorescent, you need to take away the starter, then you can install it into the bracket directly.

l Removing ballast in the bracket saves much more energy.

l Jioning the cathode and anode power line to tubes at each side to light up, if you collect up two lines at one side, there will be a short circuit.